Compatible replacement solar panel – suitable for VELUX SSL S22/V22

Compatible replacement solar panel – suitable for VELUX SSL S22/V22
 “I replace a weakened or faulty solar panel so that the existing 10.8 V NiMH battery in your VELUX SSL solar roller shutter can charge reliably again.”
 This offer includes a modified, compatible replacement solar panel, suitable for VELUX SSL solar roller shutters in the S22/V22 series with the previous 10.8 V NiMH drive system. The panel is prepared for S22/V22 applications and comes with a compatible connector. It is ready to connect and can be installed without soldering or modifying the connection cable. This is not an original VELUX product.
 
 
 
Replacement for the existing solar panel – suitable for VELUX SSL S22/V22
 The solar panel regularly recharges the NiMH battery built into the roller shutter motor. As the panel ages, the charging performance of the existing panel may decrease, even if no obvious external damage is initially visible.
 A weakened solar panel can mean that the battery is no longer fully charged and the solar roller shutter only works to a limited extent.
 
 
 
Typical signs of a weak solar panel
 
 
 
The battery is no longer fully charged
 
 
The roller shutter only moves part of the way
 
 
The motor stops again after a short movement
 
 
The roller shutter moves down and then back again
 
 
A new battery will be deeply discharged again within a short period of time
 
 
The system only works reliably for a short time after the battery has been replaced
 
 
 
 
Product features
 
 
 
Compatible replacement solar panel, suitable for VELUX SSL S22/V22
 
 
Suitable for the previous 10.8 V NiMH system generation
 
 
Designed for the existing solar charging circuit in the approx. 20 V class
 
 
Fitted with a compatible connector
 
 
Adapted connection cable, ready to connect
 
 
Mechanically prepared for the intended S22/V22 application
 
 
Polarity and electrical function tested
 
 
Ready to install, no soldering required
 
 
 
 
What's included
 
 
 
1 x Modified Compatible Replacement Solar Panel
 
 
1 x connection cable with compatible connector
 
 
Electrical function test
 
 
Polarity check
 
 
Preparation for installation in suitable S22/V22 applications
 
 
The motor, battery pack, remote control, roller shutter curtain and other accessories are not included unless expressly stated otherwise.
 
 
 
Compatibility
 
Suitable for appropriately equipped systems:
 
 
 
VELUX SSL solar roller shutters from the previous 10.8 V NiMH system generation
 
 
Series S22 or V22
 
 
Versions from around 2012
 
 
Motors from the previous 10.8 V NiMH system generation
 
 
motor references for example 830967, 834296 and 863678
 
 
Systems with the existing solar charging circuit in the approx. 20 V class
 
 
Compatibility should be tested before purchase using photos of the existing roller shutter, motor, panels and connector.
 
 
 
Not suitable for
 
 
 
Newer VELUX motor platforms with short black 4.5V solar panel
 
 
Drives with different voltage systems
 
 
Systems in which the motor, battery or electronics have already been converted elsewhere
 
 
Systems in which the existing connection plug or design does not match the S22/V22 version
 
 
Important: Motor and solar panel of different voltage systems must not be combined with each other. A 4.5 V system cannot be equated with the previous 10.8 V NiMH system generation or the approximately 20 V solar charging circuit.
 
 
 
Needed before purchasing
 Please send clear photos in advance so that the appropriate version can be tested:
 
 
 
Nameplate on the lower roller shutter slat
 
 
Sticker on the motor unit
 
 
Existing solar panel
 
 
Connector and plug connections
 
 
Installation situation on the roller shutter
 
 
 
 
Sustainability through targeted replacement
 If only the solar panel is weakened or defective, the entire solar roller shutter drive does not necessarily need to be replaced. By specifically replacing the panel, the existing 10.8 V drive technology can often continue to be used.
 This saves material, reduces unnecessary spare part costs and preserves the existing system generation.
 
 
 
Important notes
 
 
 
Modified, compatible replacement part from an independent supplier
 
 
Not an original VELUX solar panel
 
 
Connection via a compatible connector, not an original VELUX connector
 
 
Ready to connect, no soldering required
 
 
The panel is intended for the previous 10.8 V NiMH system generation
 
 
Compatibility should be checked using customer photos before purchase
 
 
Installation and connection should be carried out professionally
 
 
 
 
Advantages at a glance
 
 
 
Compatible replacement solar panel, suitable for VELUX SSL S22/V22
 
 
Suitable for previous 10.8 V NiMH drive systems
 
 
With compatible connector
 
 
Modified and prepared ready for installation
 
 
No soldering or modifications to the connection cable required
 
 
Polarity and electrical function tested
 
 
Suitable for the existing approx. 20 V solar charging circuit
 
 
Useful in the case of weak charging performance or recurring deep battery discharge
 
 
Sustainable alternative to completely replacing the drive system
 
 
 
 
Legal product notice
 The solar panel offered is a replacement part adapted, tested and appropriately labelled by Smart Home Thomas Reh / Rohrmotor-Doktor for the intended application. This product is not an original VELUX solar panel. The compatible connector used is not an original VELUX connector either.
 The VELUX name is used solely to describe compatibility and intended use. VELUX is a registered trademark of VKR Holding A/S. This independent replacement parts offer has no commercial affiliation with the VELUX Group and is neither manufactured nor authorised by it.