top of page
Elero CSM-E SunTop tubular motor repair | electronic | awning drive

Elero CSM-E SunTop tubular motor repair | electronic | awning drive

From €50.00Price
Sales Tax Included |

Elero CSM-E SunTop Tubular Motor Repair – Specialist Workshop for Electronic Awning Motors with Limit Switch Technology

 

Your Elero tubular motor says:

“I was the motor that always knew when to stop – precise, quiet and reliable in daily operation.”

“At Thomas Reh, my electronics were tested and my limit positions were recalibrated – ready to move the awning with confidence once again.”

 

The electronic Elero motor for awnings

The electronic tubular motors CSM-E and SunTop from Elero were specifically developed for articulated-arm awnings and cassette awnings. They combine precise limit switch technology with a robust mechanical design, ensuring accurate stop points when extending and retracting the awning – even after many operating cycles.

Thanks to their precise limit shut-off and durable components, these motors are especially suited for demanding awning applications, such as cassette or counter-traction systems. The electronic limit position detection remains stored permanently and can be easily readjusted if required – ideal for long-term operation.

Each repair is performed in a certified workshop, electronically tested, and set according to the original awning-motor parameters – “tested” for reliable performance under sun, wind and weather.

 

Advantages compared with purchasing a new motor

  • Sustainable: Environmentally friendly repair instead of replacement – proven electronics stay in service.
  • Cost-efficient: Repair is more economical than replacement; no conversion or new controller required.
  • Automatic limit positions: After refurbishment, the electronic limit settings remain stored – unless a factory reset is required.
  • Reliable: Electronics are tested to ensure precise limit positioning for awnings and counter-traction systems.
  • Compatible: Suitable for awning systems with Elero controls or external timers.
  • Also for older models: Repair often possible after diagnosing the fault beforehand.

 

This repair applies to the following fault patterns

  • Awnings extend but retract only with manual assistance
  • Motor runs, hums, or responds with delay
  • Distinct “click” noise when changing direction

 

Repair process

  • Order: Select the appropriate motor model and complete your order.
  • Shipping: Send in the defective motor, properly packaged (shipping costs borne by the buyer).
    Shipping address: Smart Home Thomas Reh, Auenweg 19, 77880 Sasbach, Germany.
  • Repair: Professional refurbishment within 1–2 working days.
  • Repair: Professional refurbishment within 1–2 working days.
  • Return shipping: Return shipping is generally possible, but only at standard parcel rates if the motor is packed securely, space-saving and transport-safe. For bulky or insufficient packaging (e.g., tube cartons or oversized parcels), I reserve the right to charge the additional return-shipping costs separately.

 

Processing & shipping time

  • The motor is repaired no later than the next business day after arrival.
  • Return shipping usually occurs within one additional business day.
  • Processing time may vary depending on the platform and shipping method; exact details are provided when placing the order.

 

Important requirements

  • Repair only for selected Elero models (see variant list)

  • No repair possible in cases of total damage (e.g., water damage, burnt windings, defective gearbox or brake, as well as overvoltage damage)

  • Motor must not have been opened or tampered with

 

Product safety and quality

All repairs are performed according to the relevant safety standards and ensure proper motor functionality. Modifications to the building’s electrical installation may only be carried out by qualified electricians.

 

Service & extras

On request, I offer a loan cable for setting or resetting the motor. Please contact me in advance.

 

Warranty

The statutory warranty period is 2 years, applying exclusively to the components installed during the repair.

No warranty is provided for the entire motor or other components.

 

Sustainability & second life

Each repair extends the motor’s service life, reduces electronic waste and conserves valuable resources.

In our “Second Life” section, you can also find refurbished motors as replacement units.

 

Legal notice

Smart Home Thomas Reh is an independent company and is not affiliated with elero GmbH. The use of the name “Elero” serves solely to describe the service offered.
Smart Home Thomas Reh is an independent, licensed craftsman business of the electrical engineering trade. Repairs are performed exclusively in accordance with applicable trade regulations. Supervisory authority: Handwerkskammer Freiburg, Bismarckallee 6, 79098 Freiburg im Breisgau, Germany.

 

Associated reference numbers on the type label:

T9/2.5 CSM-E:
31374.001.0006.07

T11/4 CSM-E:
31.504.0001.000

Quantity
  • Fehler-Findung Rohrmotor: Diagnose

    Troubleshooting Promise for Tubular Motors

    Is your tubular motor no longer responding, only moving briefly, or making a typical "click" sound? Not every defect automatically means a total economic loss.

    In many cases, motors can be sent in directly and repaired. In the event of unclear or borderline fault symptoms, however, I recommend a telephone pre-assessment. This allows us to estimate in advance whether a repair appears realistic or whether a total loss may be present.

    After prior consultation, my Troubleshooting Promise applies: I carefully inspect the submitted tubular motor for repairability. If repair is not technically reasonable or economically viable, only the agreed troubleshooting flat rate of €35 plus any return shipping costs will be charged.

    In any case, you will receive a transparent professional assessment and can then decide yourself on the next steps.

    Frequently Asked Questions about Tubular Motor Diagnosis

    Do I need to call before every shipment? No. Many motors can be sent in directly. However, in the case of unclear or unusual fault symptoms, a telephone consultation is recommended.

    When does the Troubleshooting Promise apply? The promise applies after prior coordination if repairability is to be assessed.

    What happens in the event of a total loss? If repair is not reasonable, only the troubleshooting flat rate of €25 plus any return shipping costs will be charged.

  • Einstell- & Reset-Leihkabel für Motoren

    Reset tubular motor & set end positions – optional rental cable

    For resetting to factory settings or re-adjusting the end positions, many 230V tubular motors may require a setting cable – especially when the reset sequence must be triggered via the circuit breaker (fuse) and the motor is not within sight or hearing range. Many drives confirm the reset with a clicking sound or a brief motor movement. With a universally applicable setting & reset rental cable, commissioning or resetting can be carried out in a more controlled manner without having to switch repeatedly between the motor and the fuse box. The rental cable is not included in this motor offer but can be ordered separately in the shop, subject to availability. Further information: View universal setting & reset rental cable

No Reviews YetShare your thoughts. Be the first to leave a review.
bottom of page