Becker R and L Series E12 S PS PS+ SE Tubular Motor Repair | electronic | awning
Becker R and L Series E12 PS PS+ SE tubular motor repair - specialist company for electronic awning motors with limit-setting technology
Important note – repair service
This offer is exclusively a repair service. No tubular motor is sold.
The subject of the contract is the professional repair of the tubular motor sent in by the customer. The motor sent in remains the property of the customer at all times.
By sending in the motor, the customer commissions the repair service and demands that this begins before the cancellation period expires.
Your Becker tubular motor says:
“I was the motor that knew when to stop – precise, quiet and reliable in daily use.”
“At Thomas Reh my electronics were tested and my limit positions were precisely adjusted again – ready to move the awning reliably.”
The electronic Becker motor for awnings
The electronic tubular motors of the E12, PS(+) and SE series from Becker were developed specifically for folding arm and cassette awnings. They combine precise limit-setting technology with robust mechanics and ensure exact stopping points when retracting and extending the awning - even after many running cycles.
The motors are characterized by their quiet running, high repeatability and long-lasting construction. Thanks to the electronic limit settings detection, the setting is permanently retained and can be readjusted if necessary - ideal for awnings with counter-pull or complex mechanics.
Every repair is tested by a specialist company, tested electronic and carried out with the original setting parameters for awning drives - “tested” for the next use under sun, wind and weather.
Advantages compared to a new purchase
- Sustainable: Environmentally friendly repairs instead of buying new ones – proven electronics remain in use.
- Cost-saving: Repair cheaper than buying new, no conversion or new control required.
- Automatic limit positions: After the repair, the electronic limit settings detection remains intact - if no factory setting was necessary.
- Reliable: Electronics are tested and ensure precise limit position adjustment for awnings and counter-pull systems.
- Compatible: Suitable for awning systems with Becker controls or external timer technology.
This repair applies to the following error patterns
- The awning extends, but only retracts with slight pressure
- Motor runs, hums or responds with a delay
- Clear “clack” noise when changing direction
Repair process
- An order: Select the appropriate motor model and complete the order.
- Sending: Send in the defective motor properly packaged (shipping costs for buyer).
- Repair: Professional repairs within 1-2 working days.
- Return shipping: Return shipping is generally possible, but only at the usual package costs if the motor sent in is packaged in a stable, space-saving and safe manner for transport. In the case of bulky or inadequate packaging (e.g. tube or bulky goods boxes), I reserve the right to invoice the additional costs of return shipping separately.
Processing time & shipping time
- The motor will be repaired no later than the following working day after receipt of the goods.
- The return usually takes place within another working day.
- Processing time may vary depending on platform and shipping method; exact information will be provided when the order is placed.
Important requirements
Repair only for selected Becker models (see variant list)
No repairs in the event of total damage (e.g. water damage, burnt out windings, defective gears or brakes, as well as overvoltage damage)
The motor must not have been opened or tampered with
Product safety and quality
All repairs are carried out in accordance with the relevant safety standards and ensure that the motor functions properly. Changes to the house installation may only be made by qualified electricians.
Service & Extras
Upon request, I offer a rental cable for adjusting or resetting the motor. Please contact us in advance.
Warranty
A statutory warranty of 2 years applies exclusively to the installed spare parts.
A warranty on the entire motor or other components is excluded.
Sustainability & Second Life
Every repair extends the lifespan of your motor, reduces electronic waste and saves valuable resources.
In our “Second Life” section you will also find refurbished motors as a replacement solution.
Legal notice
Smart Home Thomas Reh is an independent company and is not affiliated with BECKER-Antriebe GmbH. The mention of the name “Becker” serves solely to describe the service offered.
Smart Home Thomas Reh is an independent, registered electrical engineering trade. Repairs are carried out exclusively in accordance with the applicable craft regulations. Responsible supervisory authority: Freiburg Chamber of Crafts, Bismarckallee 6, 79098 Freiburg im Breisgau.
Corresponding reference number on the nameplate:
R20/17C_PS+:
20200301010
R30/17PS+:
20300301060
R40/17PS:
20400301000
R40/17C_PS+:
20401301400 - 2040130140
Tubular motor fault diagnosis
Troubleshooting promise for tubular motors
Is your tubular motor no longer responding, only moving briefly or acknowledging it with a typical “clack” noise? Not every fault means the unit is beyond economical repair.In many cases, motors can be sent in and repaired directly. However, if the error patterns are unclear or borderline, I recommend a brief preliminary phone consultation. This makes it possible to assess in advance whether a repair seems realistic or whether there may be a total loss.
Following prior consultation, my fault-diagnosis guarantee applies: I carefully assess the submitted tubular motor for repairability. If a repair is technically impractical or not economically viable, you will only be charged the agreed fault-diagnosis fee of €25 plus possible return shipping.
In any case, you will receive a transparent professional assessment and then decide for yourself how to proceed.
Frequently asked questions about tubular motor diagnosis
Do I have to call before each submission?
No. Many motors can be sent in directly. However, if the error patterns are unclear or unusual, a telephone consultation is recommended.When does the fault-diagnosis guarantee apply?
The promise applies after prior agreement if repairability is to be tested.What happens in the event of a total loss?
If a repair is not worthwhile, you will only be charged the fault-diagnosis fee of €25 plus possible return shipping.Adjustment and reset cable rental for motors
Resetting a tubular motor and setting the limit positions – optional adjustment cable rental
To restore the factory settings or readjust the limit positions, many 230 V tubular motors may require an adjustment cable. This is particularly useful when the reset sequence has to be activated at the circuit breaker (fuse) and the motor is neither visible nor within hearing distance.
Many drives confirm the reset with a clicking sound or a brief movement of the motor. A universal adjustment and reset cable available for rental lets you carry out commissioning or resetting in a more controlled manner without repeatedly moving between the motor and the fuse box.
The rental cable is not included with this motor offer, but can be ordered separately from the shop, subject to availability.
Further information:
View the universal adjustment and reset cable rental
Reviews
Sehr netter Kontakt und Beratung. Schnelle Reparatur und Rückversand Top.