top of page
Becker R L Series C12 PSF PSF+ Tubular Motor Repair | Radio Control | Awning

Becker R L Series C12 PSF PSF+ Tubular Motor Repair | Radio Control | Awning

From €50.00Price
Sales Tax Included |

Becker R L Series C12 PSF / PSF+ Tubular Motor Repair – Specialist Workshop for Radio Motors (Centronic & Centronic PLUS) for Folding Arm & Cassette Awnings

 

Your Becker tubular motor says:

“I am the radio motor for perfect sun protection – precise, quiet and reliable.”

“At Thomas Reh, my electronics were tested and my radio connection recalibrated – ready for many more summers in sun and wind.”

 

The specialised Becker radio motor for awnings

The C12-PSF and PSF+ radio motors from Becker are high-quality drives for folding arm and cassette awnings. They operate with the proven Centronic and Centronic PLUS radio systems and combine precise limit-switch technology with convenient wireless control.

Becker radio motors are known for their robust electronics, smooth operation and particularly stable radio transmission. They can be controlled comfortably via handheld transmitters, radio timers or central control units, and can be integrated into existing Becker control systems. Via Centronic PLUS, integration into modern smart home systems is also possible.

Each motor is tested, adjusted and function-checked in the workshop – “tested” and ready for its next deployment in sun, wind and weather.

 

Advantages compared to purchasing a new motor

  • Sustainable: Environmentally friendly repair instead of buying new – proven radio technology remains in use.
  • Cost-efficient: Repair is cheaper than replacement, and no new installation is required.
  • No re-pairing required: Existing handheld transmitters and radio control units (Centronic / Centronic PLUS) remain connected unless a factory reset is necessary.
  • Reliable: Electronics are tested and the radio range verified when an existing transmitter is provided.
  • Compatible: Supports Centronic and Centronic PLUS systems – ideal for awnings with Becker radio control.
  • Tested: Each repaired motor is function-tested, limit-tested and checked for radio stability.

 

This repair covers the following fault patterns

  • Awnings extend normally but retract only with manual assistance
  • Motor runs, hums or responds with delay
  • Distinct “click” noise when changing direction

 

Repair process

  • Order: Select the correct motor model and complete your order.
  • Shipping: Send the defective motor properly packaged (shipping costs borne by the buyer).
    Shipping address: Smart Home Thomas Reh, Auenweg 19, 77880 Sasbach, Germany.
  • Repair: Professional repair within 1–2 working days.
  • Return shipping: Possible at standard parcel prices if the motor is securely and compactly packed. For bulky or inadequately packaged shipments (e.g. tubes or oversized boxes), additional return costs may apply.

 

Processing & shipping time

  • Repair is completed no later than the next business day after arrival.
  • Return shipping usually occurs the following business day.
  • Processing times may vary depending on platform and shipping method.

 

Important requirements

  • Repair only for selected Becker models (see variants list).
  • No repair in cases of total damage (e.g. water damage, burnt windings, defective gearbox or brake, surge damage).
  • The motor must not have been opened or tampered with.

 

Product safety and quality

All repairs are carried out in accordance with applicable safety standards and ensure proper motor function. Changes to the building’s electrical installation must only be carried out by qualified electricians.

 

Service & extras

A loan cable for setting or resetting the motor is available upon request. Please contact me beforehand.

 

Warranty

A statutory warranty of 2 years applies exclusively to the replacement parts installed.
No warranty is given for the entire motor or other components.

 

Sustainability & Second Life

Each repair extends the motor’s service life, reduces electronic waste and conserves valuable resources.
In our “Second Life” section, you will also find refurbished motors as replacement options.

 

Legal notice

Smart Home Thomas Reh is an independent company and is not affiliated with BECKER-Antriebe GmbH. The use of the name “Becker” serves solely to describe the service offered.
Smart Home Thomas Reh is a registered craft business in the electrical trade. Repairs are carried out exclusively in accordance with applicable trade regulations. Supervisory authority: Handwerkskammer Freiburg, Bismarckallee 6, 79098 Freiburg im Breisgau.

Quantity
  • Fehler-Findung Rohrmotor: Diagnose

    Troubleshooting Promise for Tubular Motors

    Is your tubular motor no longer responding, only moving briefly, or making a typical "click" sound? Not every defect automatically means a total economic loss.

    In many cases, motors can be sent in directly and repaired. In the event of unclear or borderline fault symptoms, however, I recommend a telephone pre-assessment. This allows us to estimate in advance whether a repair appears realistic or whether a total loss may be present.

    After prior consultation, my Troubleshooting Promise applies: I carefully inspect the submitted tubular motor for repairability. If repair is not technically reasonable or economically viable, only the agreed troubleshooting flat rate of €35 plus any return shipping costs will be charged.

    In any case, you will receive a transparent professional assessment and can then decide yourself on the next steps.

    Frequently Asked Questions about Tubular Motor Diagnosis

    Do I need to call before every shipment? No. Many motors can be sent in directly. However, in the case of unclear or unusual fault symptoms, a telephone consultation is recommended.

    When does the Troubleshooting Promise apply? The promise applies after prior coordination if repairability is to be assessed.

    What happens in the event of a total loss? If repair is not reasonable, only the troubleshooting flat rate of €30 plus any return shipping costs will be charged.

  • Einstell- & Reset-Leihkabel für Motoren

    Reset tubular motor & set end positions – optional rental cable

    For resetting to factory settings or re-adjusting the end positions, many 230V tubular motors may require a setting cable – especially when the reset sequence must be triggered via the circuit breaker (fuse) and the motor is not within sight or hearing range. Many drives confirm the reset with a clicking sound or a brief motor movement. With a universally applicable setting & reset rental cable, commissioning or resetting can be carried out in a more controlled manner without having to switch repeatedly between the motor and the fuse box. The rental cable is not included in this motor offer but can be ordered separately in the shop, subject to availability. Further information: View universal setting & reset rental cable

No Reviews YetShare your thoughts. Be the first to leave a review.
bottom of page